Differences

This shows you the differences between two versions of the page.

--- ccgx:start [2019-01-21 11:00] – [DISQUS Comments] ictbeheer
+++ ccgx:start [2019-02-04 17:01] – [1.4 Connecting Victron products] marianka
@@ Line 101: / Line 101: @@
   - VE.Direct cables with an angled connector on one end. These are designed to minimize the required depth behind a panel, ASS030531xxx
-VE.Direct cables have a maximum length of 10 metres. It is not possible to extend them. If longer lengths are required, use the [[https://www.victronenergy.com/accessories/ve-direct-to-ve-can-interface|VE.Direct to VE.Can interface]]. Note that this is only works for BMV700 and BMV702. Not for the BMV712,  MPPT solar chargers and Inverters with a VE.Direct port. See next paragraph for more information on that VE.Can interface.
+VE.Direct cables have a maximum length of 10 metres. It is not possible to extend them. If longer lengths are required, use the [[https://www.victronenergy.com/accessories/ve-direct-to-ve-can-interface|VE.Direct to VE.Can interface]]. Note that this only works for BMV700 and BMV702. Not for the BMV712,  MPPT solar chargers and Inverters with a VE.Direct port. See next paragraph for more information on that VE.Can interface.
 __Connecting more than two devices to your CCGX using VE.Direct__
@@ Line 639: / Line 639: @@
   * [[open_source:start]]
+===== DISQUS =====
+~~DISQUS~~