Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision |
ccgx:generator_start_stop [2019-05-28 10:00] – [Generator auto start/stop on CCGX and Venus GX] mvader | ccgx:generator_start_stop [2019-08-15 12:38] – replace venus-device with GX device guy_stewart |
---|
===== 1. Introduction ===== | ===== 1. Introduction ===== |
| |
An internal relay on a [[venus-os:start|Venus-device]] (eg [[https://www.victronenergy.com/panel-systems-remote-monitoring/color-control|CCGX]]/[[https://www.victronenergy.com/panel-systems-remote-monitoring/venus-gx|Venus GX]]) can be used to automatically start and stop a generator. This relay - or switch - can be 'tripped' by a number of user-defined conditions. This manual will explain what conditions are available to you; and it will guide you through the steps required to set-up this useful functionality. | An internal relay on a [[venus-os:start|GX device]] (eg [[https://www.victronenergy.com/panel-systems-remote-monitoring/color-control|CCGX]]/[[https://www.victronenergy.com/panel-systems-remote-monitoring/venus-gx|Venus GX]]) can be used to automatically start and stop a generator. This relay - or switch - can be 'tripped' by a number of user-defined conditions. This manual will explain what conditions are available to you; and it will guide you through the steps required to set-up this useful functionality. |
| |
This is one of the available options to automatically start and stop a generator. See the [[auto-generator-start-stop:start|]] document for an overview of all options. More general information about using a generator in combination with Victron is available [[:multiplus_faq|here]]. | This is one of the available options to automatically start and stop a generator. See the [[auto-generator-start-stop:start|]] document for an overview of all options. More general information about using a generator in combination with Victron is available [[:multiplus_faq|here]]. |