Differences

This shows you the differences between two versions of the page.

--- ccgx:generator_start_stop [2019-03-17 19:51] – [6. Conditions: User-definable parameters which trigger a generator auto-start.] mvader
+++ ccgx:generator_start_stop [2019-04-25 00:40] – [5. Settings] mvader
@@ Line 62: / Line 62: @@
   * **Minimum run time**: It's good practice for a generator, once started, to be allowed to reach its operating temperature. When started manually this setting is ignored.
-  * **Detect generator at AC input**: Enabling this feature will sound an alarm whenever power is //not// detected at the AC input terminal of the Inverter/Charger. This function will bring attention to a wide variety of problems; such as lack of fuel, or a mechanical or electrical fault at the generator. This functionality is not available for VE.Can connected Multi/Quattro.
+  * **Detect generator at AC input**: Enabling this feature will raise an alarm on the GX device, as well as trigger an alarm email from the VRM portal(1), whenever power is //not// detected at the AC input terminal of the Inverter/Charger. This function will bring attention to a wide variety of problems; such as lack of fuel, or a mechanical or electrical fault at the generator. This functionality is not available for VE.Can connected Multi/Quattro. (1) requires automatic alarm monitoring on VRM to be enabled. Which it is by default.
   * **Quiet hours**: See [[#Quiet hours|Quiet hours]]