Differences

This shows you the differences between two versions of the page.

--- ccgx:firmware_upgrade_to_v2 [2019-04-25 10:16] – mvader
+++ ccgx:firmware_upgrade_to_v2 [2020-06-30 23:33] – [CCGX: Upgrading to v2] mvader
@@ Line 1: / Line 1: @@
 ====== CCGX: Upgrading to v2 ======
+===== Introduction =====
 Updating a CCGX from v1.74 to a newer version requires a one time manual upgrade. It can’t be done automatically.
 This document explains how to do the manual upgrade.
-Once upgraded, updates can be installed automatically from the internet again. See [[https://www.victronenergy.com/live/ccgx:firmware_updating|here]] for details.
+Once upgraded, updates can be installed automatically from the internet again. See [[https://www.victronenergy.com/live/ccgx:firmware_updating|here]] for how to that (after performing this one time manual update).
-.
+===== Upgrade procedure =====
 {{youtube>T-qK9f6FlmU?medium}}
@@ Line 40: / Line 41: @@
 ===== Troubleshooting =====
-=== It restart normally and doesn't start the upgrade ===
+=== It reboots but doesn't start the upgrade; instead it does a normal boot ===
-Make sure to hold (!) button E till the upgrade starts
+Solution: Make sure to hold (!) button E till the upgrade starts
 === A blue screen is shown while booting and after ~1 minute, "Starting" is displayed ===
@@ Line 62: / Line 64: @@
 Possible causes:
-  - the .swu file is missing on the sdcard. Make sure to unzip all files on the sdcard
+  - the .swu file is missing on the sdcard. Make sure to unzip all files on the sdcard;
-  - the sdcard slot in the CCGX is broken: contact your dealer for a replacement
+  - the sdcard slot in the CCGX is broken: contact your dealer for a replacement;
   - A device, mostly a BMV or MPPT, is connected to VE.Direct port 1. Try disconnecting that, and retry. Did that help? Please let us know by posting what happened here below in Disqus.