Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:start [2024-01-26 10:14] – [General information about batteries that have not been tested by Victron] mvader
+++ battery_compatibility:start [2025-06-10 10:14] (current) – guy_stewart
@@ Line 7: / Line 7: @@
 These are mostly connected via "BMS-Can" (CANBus) on a [[venus-os:start|GX device]].
-==== Specific information about batteries that have been tested by Victron ====
+==== Specific information about batteries that are known to have been tested ====
-  * [[battery_compatibility:aquion_ahi|Aquion AHI]]
   * [[battery_compatibility:axistorage|AXIstorage 7S/9S]]
   * [[battery_compatibility:battleborn|BattleBorn]]
-  * [[battery_compatibility: bluenova |Bluenova Energy Storage]]
+  * [[battery_compatibility:bluenova |Bluenova Energy Storage]]
   * [[battery_compatibility:bmz_ess|BMZ ESS 7.0 / ESS 9.0 / ESS X and ESS Z]]
   * [[battery_compatibility:bsl|BSLBATT Lithium battery]]
@@ Line 17: / Line 17: @@
   * [[battery_compatibility:cegasa|Cegasa eBick]]
   * [[battery_compatibility:discover|Discover AES]]
+  * [[battery_compatibility:dyness|Dyness]]
   * [[battery_compatibility:exide|Exide]]
   * [[battery_compatibility:freedomwon|Freedom Won LiTE and eTower]]
   * [[battery_compatibility:hubble|Hubble Lithium]]
-  * [[battery_compatibility:lg_chem_resu|LG Chem Resu]] - (Grid Connected ESS Only)
+  * [[battery_compatibility:LBSA|LBSA - Lithium Batteries South Africa]]
+  * [[battery_compatibility:leoch|Leoch]]
+  * [[battery_compatibility:meterboost|MeterBoost]]
   * [[battery_compatibility:mgenergysystems|MG Energy Systems]]
   * [[pylontech_phantom|Pylontech]]
-  * [[battery_compatibility:redflow_zcell|Redflow ZBM2 / ZCell]]
+  * [[battery_compatibility:pytes|Pytes]]
   * [[battery_compatibility:rolls|Rolls LFP]]
   * [[battery_compatibility:simpliphi_power|SimpliPhi Power]]
   * [[battery_compatibility:Solar MD|SolarMD]]
+  * [[battery_compatibility:Soluna|Soluna]]
+  * [[battery_compatibility:Sunwoda|Sunwoda]]
   * [[https://www.victronenergy.com/batteries/lithium-battery-12-8v|Victron Lithium Batteries]]
+  * [[battery_compatibility:weco|WeCo]]
+  * [[battery_compatibility:ZYC Energy|ZYC Energy]]
@@ Line 50: / Line 57: @@
   * 123\SmartBMS - [[https://123electric.eu/support/category/123smartbms-victron-integration/|Victron instructions]]
-  * REC BMS - https://www.rec-bms.com/ (various Victron documentation on their website)
+  * Batrium - [[https://wiki.batrium.com/integration/victron|Batrium Knowledge Victron Integration wiki]]
   * Boostech GmbH BMS - https://www.boostech.de/bms-konfigurator/
+  * REC BMS - https://www.rec-bms.com/ (various Victron documentation on their website)
-==== Common issues we have seen from other DIY / Self-build oriented BMSes ====
-Batteries with a BMS that blocks charge or discharge current, or sets CCL to 0 when full, cause all sorts of warnings and alarms, which can often be very confusing or misleading.
+==== Common issues we have seen from other DIY / Self-build oriented BMSes ====
-In this case the Victron inverter/charger reports overload, and time is spent in diagnosing the Victron and understanding why it gives an overload on site, but then works perfectly when on a test bench; to find the cause is a custom BMS with a DIY battery.
-Another common example is Victron requires the BMS to change the Charge Voltage Limit to restrict power flowing to the battery as it gets full. If the BMS attempts restriction using the Charge Current Limit without adjusting the Charge Voltage Limit it can cause Overcharge, Overvoltage or Overcurrent warnings.
+Batteries using a BMS that blocks charge, or discharge current, or sets CCL to 0 when full, can trigger a number of confusing or misleading inverter/charger warnings and alarms.
+For example the Victron inverter/charger reports overload conditions with little load, resulting in a lot of time and effort troubleshooting the fault, only for the inverter to work perfectly when on a test bench, and then discovering the actual cause is a custom BMS with a DIY battery.
+Another common problem as a battery becomes fully charged, Victron requires the BMS to change the Charge Voltage Limit (CVL) to restrict the power flowing to the battery. If, however, the BMS attempts to restrict power using the Charge Current Limit, without adjusting the Charge Voltage Limit, this can trigger Overcharge, Overvoltage or Overcurrent warnings.
 ==== SAFETY WARNING ====