User Tools

Site Tools


battery_compatibility:solar_md

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
battery_compatibility:solar_md [2019-07-27 17:38] – [Victron & SOLARMD Battery] kaloyanbattery_compatibility:solar_md [2019-07-28 09:35] – [Victron & SOLARMD Battery] kaloyan
Line 3: Line 3:
 The combination of Victron products with SolarMD Battery lithium batteries has been tested and certified by the Solar MD R&D department. This combination has extensive field experience and is actively supported by Solar MD. The combination of Victron products with SolarMD Battery lithium batteries has been tested and certified by the Solar MD R&D department. This combination has extensive field experience and is actively supported by Solar MD.
  
-The SolarMD Battery includes an integrated Battery Management System (BMS) with each battery module and a LOGGER V2 that interfaces with the Victron [[venus-os:start|Venus-device]] and supports multiple battery modules.+The SolarMD Battery includes an integrated Battery Management System (BMS) with each battery module and a LOGGER V2 that interfaces with the Victron [[venus-os:start|Venus-device]] and supports multiple battery modules. To find out how to install the Logger V2 watch this [[https://www.youtube.com/watch?v=9T-sshGcJ3w&t=2s|YouTube installation video]].
  
  
Line 22: Line 22:
 ---- ----
  
-== System overview ==+__//== System overview ==//__
  
 {{:battery_compatibility:solarmd-victron_wiring.jpg?direct |}} {{:battery_compatibility:solarmd-victron_wiring.jpg?direct |}}
Line 29: Line 29:
 ---- ----
  
-== Typical installation with a Single SS4074 and Multiplus II 48/3000 ==+__//== Typical installation with a Single SS4074 and Multiplus II 48/3000 ==//__
  
 {{ :battery_compatibility:typical_solar_md_victron_installation.png?direct |}} {{ :battery_compatibility:typical_solar_md_victron_installation.png?direct |}}
Line 37: Line 37:
  
  
-== Typical installation with Multiple SS202 modules, 3 Quattros, 3 MPPTs, and Fronius integration ==+__//== Typical installation with Multiple SS202 modules, 3 Quattros, 3 MPPTs, and Fronius integration ==//__
  
 {{ :battery_compatibility:unilec_installation_minigrid.jpeg?direct |}} {{ :battery_compatibility:unilec_installation_minigrid.jpeg?direct |}}
Line 86: Line 86:
  
 For SS237 - 25.6V (24V systems) please contact [[support@solarmd.co.za|Solar MD support team]] for further assistance. For SS237 - 25.6V (24V systems) please contact [[support@solarmd.co.za|Solar MD support team]] for further assistance.
 +
 +----
 +
  
 Solar MD also releases a firmware update for the LOGGER V2 and BMS. LOGGER V2 Firmware versions earlier than V6-13 are not compatible with Victron equipment and can cause the battery to not be detected. All software updates of Solar MD equipment are done remotely and automatically as soon as the Logger V2 has an internet connection. Solar MD also releases a firmware update for the LOGGER V2 and BMS. LOGGER V2 Firmware versions earlier than V6-13 are not compatible with Victron equipment and can cause the battery to not be detected. All software updates of Solar MD equipment are done remotely and automatically as soon as the Logger V2 has an internet connection.
Line 187: Line 190:
  
  
 +
 +----
  
  
Line 215: Line 220:
  
 If you have a VE.Can MPPT, it is advised to use the Venus GX in place of the CCGX. If you have a VE.Can MPPT, it is advised to use the Venus GX in place of the CCGX.
 +
 +----
 +
  
   * Select the CAN-bus BMS (500 kbit/s) CAN-profile in the CCGX.    * Select the CAN-bus BMS (500 kbit/s) CAN-profile in the CCGX. 
Line 221: Line 229:
 Settings → Services → CAN-profile. Settings → Services → CAN-profile.
  
-{{ :battery_compatibility:2019-07-27_17_05_49-_-_vrm_portal_-_can_speed.png?direct |}}+{{:battery_compatibility:2019-07-27_17_05_49-_-_vrm_portal_-_can_speed.png?direct |}}
  
-  * On the Solar MD portal ([[login.mypower24.co.za]]) Select Victron CAN Translator on CAN2: +---- 
 + 
 +  * On the Solar MD portal ([[http://login.mypower24.co.za]]) Select Victron CAN Translator on CAN2: 
 Menu path:  Menu path: 
  
-My Devices → Logger → Interfaces → CANBUS2+My Devices → Logger → Interfaces → CANBUS2 . After choosing Victron CAN Translator, proceed with Software reboot on the Logger V2 in the Tab  "System Settings" 
 + 
 +{{:battery_compatibility:solar_md_portal.png?direct |}} 
 + 
 +----
  
-{{ :battery_compatibility:solar_md_portal.png?direct |}} 
    
   * After properly wiring and setting up, the Battery will be visible as a battery in the device list:   * After properly wiring and setting up, the Battery will be visible as a battery in the device list:
  
-{{ :battery_compatibility:venus_solarmd.png?direct |}}+{{:battery_compatibility:venus_solarmd.png?direct |}}
    
 (if you have multiple batteries a single entry will show up, which represents all batteries). (if you have multiple batteries a single entry will show up, which represents all batteries).
 +
 +----
 +
  
   * The parameters option within the battery page shows the actual battery charge and discharge limits   * The parameters option within the battery page shows the actual battery charge and discharge limits
battery_compatibility/solar_md.txt · Last modified: 2022-06-18 14:14 by kaloyan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki