User Tools

Site Tools


battery_compatibility:pylontech_phantom

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
battery_compatibility:pylontech_phantom [2019-10-27 22:36]
guystewart
battery_compatibility:pylontech_phantom [2020-02-05 12:56]
guy_stewart
Line 34: Line 34:
 === 1.3 All 48V Multi, MultiPlus, MultiGrid and Quattro are compatible === === 1.3 All 48V Multi, MultiPlus, MultiGrid and Quattro are compatible ===
  
-The minimum firmware version is 422. Though updating to the latest firmware is recommended where possible.+The minimum firmware version is 422. Though ​[[https://​docs.victronenergy.com/​victronconnect-vebus.html#​firmware-updates|updating to the latest firmware]] is recommended where possible, and a necessary first step when troubleshooting issues.
  
 These inverter/​charger units must be connected to the [[venus-os:​start|GX device]] via the VE.Bus connection port.  These inverter/​charger units must be connected to the [[venus-os:​start|GX device]] via the VE.Bus connection port. 
Line 63: Line 63:
 Using very large solar arrays with battery banks that are too small can exceed the limits of the batteries ability to charge and possibly lead to the BMS triggering over-current alarms. Using very large solar arrays with battery banks that are too small can exceed the limits of the batteries ability to charge and possibly lead to the BMS triggering over-current alarms.
  
-You must have the minimum number of units to supply the startup inrush surge currents ​and potential current ​demand ​of the load connected to the inverter. It is more desirable to have the inverter/​charger overload than the battery. ​+You must have the minimum number of battery modules ​to supply the inverters ​startup inrush surge currents ​that charge the capacitors when the inverter is first connected, this occurs prior to any loads being connected. There is also the subsequent ​potential current ​demands ​of the loads connected to the inverter. ​ 
 +It is much more desirable to have the inverter/​charger overload than the battery, as the inverter will automatically recover, whereas the battery may require intervention once in a fault state.
  
 Some suggested battery sizings for common Victron inverter/​chargers are listed below. These are suggestions for reliable operation for single phase off grid and are not specified by Pylontech. ​ Some suggested battery sizings for common Victron inverter/​chargers are listed below. These are suggestions for reliable operation for single phase off grid and are not specified by Pylontech. ​
Line 76: Line 77:
 | Quattro 48/​10000/​140-100/​100 | 8000 | 20000 | 7 | 8400 | 33600 | | Quattro 48/​10000/​140-100/​100 | 8000 | 20000 | 7 | 8400 | 33600 |
 | Quattro 48/​15000/​200-100/​100 | 12000 | 25000 | 10 | 12000 | 48000 | | Quattro 48/​15000/​200-100/​100 | 12000 | 25000 | 10 | 12000 | 48000 |
- 
  
  
battery_compatibility/pylontech_phantom.txt · Last modified: 2020-03-09 12:10 by warwickchapman