Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:panasonic_dcb105 [2018-04-05 17:15] – amit_saklani
+++ battery_compatibility:panasonic_dcb105 [2018-04-06 07:05] – [Contact] carsten
@@ Line 6: / Line 6: @@
 **Notes:**
-  * Panasonic DCB-105 with CIU can only be used in all type of installations including Victron ESS installation: an installation that uses the ESS Assistant.
+  * Panasonic DCB-105 with CIU can only be used in all type of installations including [[https://www.victronenergy.com/live/assistants:ess-assistant|Victron ESS installation]]: an installation that uses the ESS Assistant.
   * With ESS assistant, Panasonic energy storage could be used in parallel with the grid with grid import and export feature. Additionally, an HMI with customizable grid set points for various operating modes such a fixed power, day scheduling, user defined schedule can be implemented.
   * Panasonic batteries with CIU and MPPT Solar Chargers with a VE.Can communication port cannot be both connected to the CCGX, because of different canbus speeds. Use Solar Chargers with a VE.Direct comm. port instead.
@@ Line 14: / Line 14: @@
   - Plug the CCGX side of that cable into one of the VE.Can sockets on the back of the CCGX.
   - Plug the other end into the CAN port of the data converter which is part of CIU.
-  - Then, plug a VE.Can terminator in the other VE.Can socket on the CCGX. Two VE.Can terminators are included with the package of the CCGX as an accessory, only one is used. Keep the other one as a spare.
+  - Then, plug a [[https://www.victronenergy.com/accessories/ve-can-rj45-terminator|VE.Can terminator]] in the other VE.Can socket on the CCGX. Two VE.Can terminators are included with the package of the CCGX as an accessory, only one is used. Keep the other one as a spare.
   - Without properly connecting this cable, the battery will stop charging/discharging after 10 minutes. Also, the battery will not show up on the display of the CCGX.
@@ Line 72: / Line 72: @@
           * This happens when the batteries are fully charged (100% SOC) after which the batteries no longer accept charge. Once the batteries are discharged below 95%, charge current can be accepted again and the value of max. charge current changes from 0 to 25A.
+----