battery_compatibility:hubble
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| battery_compatibility:hubble [2023-11-01 11:33] – [Configure for Victron] adaptive + save and reboot warwickchapman | battery_compatibility:hubble [2026-02-03 12:29] (current) – [48V] added AM16 warwickchapman | ||
|---|---|---|---|
| Line 172: | Line 172: | ||
| - Battery capacity: Use 100Ah per Hubble battery (excl. AM-10: 200Ah, AM-3: 50Ah, S-200: 200Ah, Blade: 137Ah). Eg. If there are 3 x AM-4, then capacity is 300Ah. | - Battery capacity: Use 100Ah per Hubble battery (excl. AM-10: 200Ah, AM-3: 50Ah, S-200: 200Ah, Blade: 137Ah). Eg. If there are 3 x AM-4, then capacity is 300Ah. | ||
| - Sustain voltage, set the value from the tables below | - Sustain voltage, set the value from the tables below | ||
| - | - Dynamic cutoff, | + | - Dynamic cutoff, |
| - Restart offset, set the value from the tables below | - Restart offset, set the value from the tables below | ||
| Line 186: | Line 186: | ||
| ^ Chemistry ^ Charge ^ Cutoff ^ Restart ^ Sustain ^ Models ^ | ^ Chemistry ^ Charge ^ Cutoff ^ Restart ^ Sustain ^ Models ^ | ||
| | LiNiMnCo (NMC) | 53.3V | 44.2V | 46.2V | 47.0V | AM-2, AM-3, X101 | | | LiNiMnCo (NMC) | 53.3V | 44.2V | 46.2V | 47.0V | AM-2, AM-3, X101 | | ||
| - | | LiFePO4 (LFP) | 56.0V | 48.0V | 50.0V | 50.0V | AM-5, AM-10, Blade | | + | | LiFePO4 (LFP) | 56.0V | 48.0V | 50.0V | 50.0V | AM-5, AM-10, AM-16, Blade | |
| | LiFePO4 (LFP) | 51.0V | 45.0V | 47.0V | 47.0V | X-100 | | | LiFePO4 (LFP) | 51.0V | 45.0V | 47.0V | 47.0V | X-100 | | ||
battery_compatibility/hubble.1698834794.txt.gz · Last modified: by warwickchapman