Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:cegasa [2025-01-08 08:33] – [2. Minimum Battery Sizing] guy_stewart
+++ battery_compatibility:cegasa [2026-03-17 09:08] (current) – bob
@@ Line 1: / Line 1: @@
 ====== Victron & Cegasa ======
-^  Battery ^  EBick LV ^
+^  Battery ^  EBick LV ^  EBick LV 15^
-|  Appearance |  {{ :battery_compatibility:ebick_ultra_menu.png?100 |}}|
+|  Appearance |  {{ :battery_compatibility:ebick-lv-front.png?200 |}}| {{:battery_compatibility:ebick-lv-front.png?200|}}|
-|  ESS |  yes|
+|  ESS |  yes|  yes|
-|  Grid Backup|  yes|
+|  Grid Backup|  yes|  yes|
-|  Off-Grid|  yes|
+|  Off-Grid|  yes|  yes|
-|  Module capacity|  13.5 kWh |
+|  Module capacity|  13.5 kWh |  15 kWh |
-|  Module limit |  20|
+|  Module limit |  20|  20|
-|  Max capacity|  270 kWh|
+|  Max capacity|  270 kWh|  300 kWh|
@@ Line 62: / Line 62: @@
 The following information is provided by Cegasa, it is reproduced here for your convenience and should always be confirmed with the latest Cegasa manuals and specifications.
-Each Cegasa eBick battery module is 13.5 kWh, approximately 280Ah at 48V (52.2V maximum).
+Each Cegasa eBick LV battery module is 13.5 kWh, approximately 280Ah at 48V (52.2V maximum). Each Cegasa eBick LV 15 battery module is 15 kWh, approximately 314Ah at 48V (52.2V maximum).
 The allowable charge and discharge rates are managed automatically by the Cegasa BMS and [[venus-os:start|GX device]]. Temperature effects on charge rates should be considered in the design stage in hot and cold climates.
@@ Line 76: / Line 76: @@
 |  Inverter/Charger  |  ESS |  ESS |  Off-grid |  Off-grid |
 |  Multiplus & Multiplus II & MP-II GX 48/3000/35|  1|  1|  1|  2|
-|  Multiplus & Multiplus II & MP-II GX 48/5000/70|  1|  2|  1|  3|
+|  Multiplus & Multiplus II & MP-II GX 48/5000/70|  1|  2|  1|  2|
 |  Inverter RS & Multi RS 48/6000|  1|  -|  1|  -|
-|  Quattro 48/5000/70-100/100|  1|  2|  1|  3|
+|  Quattro 48/5000/70-100/100|  1|  2|  1|  2|
-|  Quattro 48/8000/110-100/100|  2|  4|  2|  5|
+|  Quattro 48/8000/110-100/100|  1|  3|  1|  3|
-|  Quattro 48/10000/140- 100/100|  2|  4|  2|  6|
+|  Quattro 48/10000/140- 100/100|  1|  3|  2|  4|
-|  Quattro 48/15000/200- 100/100|  3|  6|  3|  7|
+|  Quattro 48/15000/200- 100/100|  2|  6|  2|  6|
 |  EasySolar & EasySolar-II 48/3000/35-50 MPPT|  1|  1|  1|  2|
-|  EasySolar 48/5000/70-100 MPPT|  1|  2|  1|  3|
+|  EasySolar 48/5000/70-100 MPPT|  1|  2|  1|  2|
@@ Line 117: / Line 117: @@
 | Float voltage (1)         | 52 V  |
 | Absorption time        | 8 Hr    |
-| Charge Current         | 30-50A per battery module |
+| Charge Current         | 140A per battery module |
 If you use any assistants after programming these settings, make sure to double check the float voltage after completing them, and if necessary set it back to 52 V.
@@ Line 144: / Line 144: @@
 ^ ESS Parameter ^ Settings ^
-|Battery Capacity     | 280 Ah|
+|Battery Capacity     | 280Ah (LV) 314Ah (LV 15)|
 |Sustain voltage.       | 50V|
 |Dynamic cut-off values | Voltage |