User Tools

Site Tools


battery_compatibility:can-bus_bms-cable

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
battery_compatibility:can-bus_bms-cable [2018-02-06 16:54]
mvader [1. Introduction]
battery_compatibility:can-bus_bms-cable [2019-10-28 10:48] (current)
mvader [DISQUS]
Line 1: Line 1:
 ====== VE.Can to CAN-bus BMS cables manual ====== ====== VE.Can to CAN-bus BMS cables manual ======
  
-Use these cables to connect a CAN-bus enabled battery to a Victron system.+Use these [[https://www.victronenergy.com/cables/ve-can-to-can-bus-bms|VE.Can to CAN-bus cables]] to connect a CAN-bus enabled battery to a [[https://www.victronenergy.com/live/venus-os:start|GX device]]. 
  
 ===== 1. Selecting the right cable ===== ===== 1. Selecting the right cable =====
Line 18: Line 19:
 ===== 2. Installation ===== ===== 2. Installation =====
  
-The side labeled 'CAN-bus BMS' plugs into the battery. The other side, labeled 'VE.Can' must be plugged into the VE.Can port of the Venus-device.+The side labeled 'CAN-bus BMS' plugs into the battery. The other side, labeled 'VE.Can' must be plugged into the VE.Can port of the GX device.
  
 For configuration, see the manual specific to the brand of battery you are using. For configuration, see the manual specific to the brand of battery you are using.
Line 39: Line 40:
 | CAN-H    | Pin 7        | Pin 4         | | CAN-H    | Pin 7        | Pin 4         |
  
-===== DISQUS ===== + 
-~~DISQUS~~+
battery_compatibility/can-bus_bms-cable.1517932451.txt.gz · Last modified: 2018-02-06 16:54 by mvader