User Tools

Site Tools


battery_compatibility:can-bus_bms-cable

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
battery_compatibility:can-bus_bms-cable [2017-12-13 17:31] – [1. Introduction] mvaderbattery_compatibility:can-bus_bms-cable [2023-12-14 07:05] (current) – [1. Selecting the right cable] warwickchapman
Line 1: Line 1:
 ====== VE.Can to CAN-bus BMS cables manual ====== ====== VE.Can to CAN-bus BMS cables manual ======
  
-===== 1. Introduction ===== +Use these [[https://www.victronenergy.com/cables/ve-can-to-can-bus-bms|VE.Can to CAN-bus cables]] to connect a CAN-bus enabled battery to a [[https://www.victronenergy.com/live/venus-os:start|GX device]].
-Use this cable to connect a CAN-bus enabled battery to a Victron system.+
  
-The side labeled 'CAN-bus BMS' plugs into the battery. The other side, labeled 'VE.Can' must be plugged into the VE.Can port of the Venus-device. 
  
-There are two types, each with different pinningSome brands of batteries require a Type A. Other brands require the Type B cable.+===== 1Selecting the right cable =====
  
-Type compatible batteries:+=== ASS030710018 - VE.Can to CAN-bus BMS type Cable 1.8m ===
  
   * BYD B-Box   * BYD B-Box
 +  * Pylontech US2000C/US3000C/UP5000/Force-L
  
-Type compatible batteries:+=== ASS030720018 - VE.Can to CAN-bus BMS type Cable 1.8m ===
  
-  * LG Chem Resu +  * AXIstorage 7S/9S
-  * AXIstorage+
   * BMZ   * BMZ
-  * Pylontech+  * BSLBATT Lithium battery 
 +  * Hubble Lithium 
 +  * LG Chem Resu 
 +  * Pylontech US2000/US3000/UP2500 
 +  * Solar MD BMS EX
  
-===== 2. Pin-out =====+=== ASS030064950 RJ45 UTP Cable (Standard Ethernet) === 
 +  * Bluenova Energy Storage 
 +  * Cegasa eBick 
 +  * Freedom Won 
 +  * MG Energy Systems 
 + 
 +=== Custom (See Battery Documentation) === 
 +  * Exide 
 +  * SolarMD Logger V2 
 + 
 +===== 2. Installation ===== 
 + 
 +The side labeled 'CAN-bus BMS' plugs into the battery. The other side, labeled 'VE.Can' must be plugged into either the VE.Can port of the GX device, or the BMS-Can port. 
 + 
 +Both port types (VE.Can and BMS-Can) on a GX Device can be configured for use with a CAN-bus BMS connected third party battery. 
 + 
 +For configuration, see the manual specific to the brand of battery you are using. 
 + 
 +===== 3. Pin-out =====
  
 In some cases it might be needed to make the cable at the location. Find below the pin-outs. Make sure to very carefully test the cable after crimping it. Self-made cables are very often the causes of very hard to diagnose problems. In some cases it might be needed to make the cable at the location. Find below the pin-outs. Make sure to very carefully test the cable after crimping it. Self-made cables are very often the causes of very hard to diagnose problems.
  
-==== 2.1 Type A ====+==== 3.1 Type A ====
 ^ Function ^ Victron VE.Can side ^ Battery side ^ ^ Function ^ Victron VE.Can side ^ Battery side ^
 | GND      | Pin 3        | Pin 6       | | GND      | Pin 3        | Pin 6       |
Line 29: Line 49:
 | CAN-H    | Pin 7        | Pin 4       | | CAN-H    | Pin 7        | Pin 4       |
  
-==== 2.2 Type B ====+==== 3.2 Type B ====
  
 ^ Function ^ Victron VE.Can side ^ Battery side ^ ^ Function ^ Victron VE.Can side ^ Battery side ^
Line 36: Line 56:
 | CAN-H    | Pin 7        | Pin 4         | | CAN-H    | Pin 7        | Pin 4         |
  
-===== DISQUS ===== + 
-~~DISQUS~~+
battery_compatibility/can-bus_bms-cable.1513182679.txt.gz · Last modified: 2017-12-13 17:31 by mvader

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki