Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:can-bus_bms-cable [2018-02-06 16:54] – [1. Introduction] mvader
+++ battery_compatibility:can-bus_bms-cable [2025-02-19 08:42] (current) – per hubble warwickchapman
@@ Line 1: / Line 1: @@
 ====== VE.Can to CAN-bus BMS cables manual ======
-Use these cables to connect a CAN-bus enabled battery to a Victron system.
+Use these [[https://www.victronenergy.com/cables/ve-can-to-can-bus-bms|VE.Can to CAN-bus cables]] to connect a CAN-bus enabled battery to a [[https://www.victronenergy.com/live/venus-os:start|GX device]].
 ===== 1. Selecting the right cable =====
@@ Line 8: / Line 9: @@
   * BYD B-Box
+  * Hubble Lithium via CloudLink (incl. AM-10+/Blade internal CloudLink)
+  * Pylontech US2000C/US3000C/UP5000/Force-L
 === ASS030720018 - VE.Can to CAN-bus BMS type B Cable 1.8m ===
-  * LG Chem Resu
+  * AXIstorage 7S/9S
-  * AXIstorage
   * BMZ
-  * Pylontech
+  * BSLBATT Lithium battery
+  * LG Chem Resu
+  * Pylontech US2000/US3000/UP2500
+  * Solar MD BMS EX
+  * Freedom Won eTower
+=== ASS030064950 RJ45 UTP Cable (Standard Ethernet) ===
+  * Bluenova Energy Storage
+  * Cegasa eBick
+  * Freedom Won LiTE
+  * MG Energy Systems
+=== Custom (See Battery Documentation) ===
+  * Exide
+  * SolarMD Logger V2
 ===== 2. Installation =====
-The side labeled 'CAN-bus BMS' plugs into the battery. The other side, labeled 'VE.Can' must be plugged into the VE.Can port of the Venus-device.
+The side labeled 'CAN-bus BMS' plugs into the battery. The other side, labeled 'VE.Can' must be plugged into either the VE.Can port of the GX device, or the BMS-Can port.
+Both port types (VE.Can and BMS-Can) on a GX Device can be configured for use with a CAN-bus BMS connected third party battery.
 For configuration, see the manual specific to the brand of battery you are using.
@@ Line 39: / Line 57: @@
 | CAN-H	   | Pin 7        | Pin 4         |
-===== DISQUS =====
-~~DISQUS~~