Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:can-bus_bms-cable [2018-02-06 16:54] – [1. Introduction] mvader
+++ battery_compatibility:can-bus_bms-cable [2019-08-15 12:46] – replace venus-device with GX device guy_stewart
@@ Line 1: / Line 1: @@
 ====== VE.Can to CAN-bus BMS cables manual ======
-Use these cables to connect a CAN-bus enabled battery to a Victron system.
+Use these [[https://www.victronenergy.com/cables/ve-can-to-can-bus-bms|VE.Can to CAN-bus cables]] to connect a CAN-bus enabled battery to a [[https://www.victronenergy.com/live/venus-os:start|GX device]].
 ===== 1. Selecting the right cable =====
@@ Line 18: / Line 19: @@
 ===== 2. Installation =====
-The side labeled 'CAN-bus BMS' plugs into the battery. The other side, labeled 'VE.Can' must be plugged into the VE.Can port of the Venus-device.
+The side labeled 'CAN-bus BMS' plugs into the battery. The other side, labeled 'VE.Can' must be plugged into the VE.Can port of the GX device.
 For configuration, see the manual specific to the brand of battery you are using.
@@ Line 38: / Line 39: @@
 | CAN-L	   | Pin 8        | Pin 5         |
 | CAN-H	   | Pin 7        | Pin 4         |
 ===== DISQUS =====
 ~~DISQUS~~