User Tools

Site Tools


battery_compatibility:bmz_ess

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
battery_compatibility:bmz_ess [2019-08-15 12:13]
guy_stewart replace venus-device with GX device
battery_compatibility:bmz_ess [2019-09-09 08:34] (current)
alexander.joist_ibc-solar.co.za
Line 1: Line 1:
-====== Victron & BMZ ESS 3.0 / ESS 7.0 =====+====== Victron & BMZ ESS 7.0 / ESS 9.0 / ESS X=====
  
-The combination of Victron products with the BMZ ESS 7.0 battery has been tested and certified by the R&D departments. The combination is actively supported by both companies.+The combination of Victron products with the BMZ ESS battery has been tested and certified by the R&D departments. The combination is actively supported by both companies.
  
 ==== 1. Introduction ==== ==== 1. Introduction ====
Line 37: Line 37:
   - Check "​Enable battery monitor"​   - Check "​Enable battery monitor"​
   - Enter the battery capacity:   - Enter the battery capacity:
-    - BMZ ESS 3.0 - 121.5 Ah +    - BMZ ESS 7.0 - 121.5 Ah 
-    - BMZ ESS 7.0 - 156.6 Ah+    - BMZ ESS 9.0 - 156.6 Ah
     - BMZ ESS X - 186.3 Ah     - BMZ ESS X - 186.3 Ah
   - The other parameters ("​State of charge when bulk finished"​ and "​Charge efficiency"​) can be left to their default setting. They are not used in this setup.   - The other parameters ("​State of charge when bulk finished"​ and "​Charge efficiency"​) can be left to their default setting. They are not used in this setup.
battery_compatibility/bmz_ess.txt · Last modified: 2019-09-09 08:34 by alexander.joist_ibc-solar.co.za