Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:bmz_ess [2021-03-20 02:58] – guystewart
+++ battery_compatibility:bmz_ess [2022-07-18 12:05] (current) – typo dfaber
@@ Line 1: / Line 1: @@
-====== Victron & BMZ ESS 7.0 / ESS 9.0 / ESS X=====
+====== Victron & BMZ =====
 The combination of Victron products with the BMZ ESS battery has been tested and certified by the R&D departments. The combination is actively supported by both companies.
+Compatible BMZ models:
+  * ESS 7.0
+  * ESS 9.0
+  * ESS X
+  * ESS Z
 ==== 1. Introduction ====
@@ Line 40: / Line 47: @@
     - BMZ ESS 9.0 - 156.6 Ah
     - BMZ ESS X - 186.3 Ah
+    - BMZ ESS Z - 162 Ah
   - The other parameters ("State of charge when bulk finished" and "Charge efficiency") can be left to their default setting. They are not used in this setup.
@@ Line 65: / Line 73: @@
 ==== 5. GX device Configuration ====
-  * Select the //CAN-bus BMS (500 kbits/s)// CAN-profile in the [[venus-os:start|GX device]]. Menu path: //Settings -> Services -> CAN-profile//. Note that this changes the function of a VE.Can port: it is not possible to connect both VE.Can products and a BMZ battery together on a Color Control GX. Is is possible on the Venus GX
+  * Select the //CAN-bus BMS (500 kbits/s)// CAN-profile in the [[venus-os:start|GX device]]. Menu path: //Settings -> Services -> CAN-profile//. Note that this changes the function of a VE.Can port: it is not possible to connect both VE.Can products and a BMZ battery together on a Color Control GX. It is possible on the Venus GX.
   * After properly wiring and setting up, the BMZ ESS will be visible as a battery in the device list:{{ :battery_compatibility:generic_battery_menu.png?nolink&290 | }}