Differences

This shows you the differences between two versions of the page.

--- battery_compatibility:aquion_ahi [2016-12-16 06:44] – [Hub-4] mvader
+++ battery_compatibility:aquion_ahi [2019-02-18 10:40] – [Configuration] marianka
@@ Line 1: / Line 1: @@
-====== Victron & Aquion AHI =====
+====== Victron & GREENROCK =====
 ===== Compatible Victron products =====
 All 48V Multis and Quattros. Also all MPPT Solar chargers that can work with a 48V battery.
-Note that there is no integration in the Color Control GX required nor available: it will not (yet) read data directly from the Aquion AHI BMS.
+Note that there is no integration in the Color Control GX required nor available: it will not (yet) read data directly from the GREENROCK BMS.
 ===== Configuration =====
@@ Line 12: / Line 12: @@
 | Float voltage                | 54.0 V                           | 55.0 V  |
 | Storage                      | Disable                          | Disable |
-| Charge current               | 17A per stack, refer to Aquion documentation | 20A per stack, refer to Aquion documentation |
+| Charge current               | 17A per stack, refer to GREENROCK documentation | 20A per stack, refer to GREENROCK documentation |
 | Repeated absorption time     | 4 hrs                            | 4 hrs |
 | Repeated absorption interval | Not required                     | Not required |
@@ Line 24: / Line 24: @@
 Make sure to lower the Dynamic Cut-off parameters, to 37.5, 37.4, 37.3 and 37.2.
 ===== DISQUS =====
 ~~DISQUS~~