User Tools

Site Tools


This is an old revision of the document!

Auto genset start/stop

There are many ways to automatically start and stop a genset using Victron equipment:

  1. potential free relay in a BMV-700. Start the generator on low battery voltage and/or low battery state of charge
  2. potential free relay in our Inverters, Multis and Quattros, using the Virtual switch
  3. potential free relay(s) in our Inverters, Multis and Quattros, using the Generator start/stop Assistant. VEConfigure Assistants

It is also possible to combine those methods, by wiring the open contacts in parallel to each other.

Starting a genset with three-wire interface

To start such a genset, our two

auto-generator-start-stop/start.1440067265.txt.gz · Last modified: 2015-08-20 12:41 by mvader