Differences

This shows you the differences between two versions of the page.

--- auto-genset-start-stop:start [2015-08-20 12:41] – created mvader
+++ auto-generator-start-stop:start [2021-02-15 09:50] – marmour
@@ Line 1: / Line 1: @@
-====== Auto genset start/stop ======
+This page has been moved to [[https://www.victronenergy.com/support-and-downloads/whitepapers|Support and Downloads/Whitepapers]].
-There are many ways to automatically start and stop a genset using Victron equipment:
-  - potential free relay in a BMV-700. Start the generator on low battery voltage and/or low battery state of charge
-  - potential free relay in our Inverters, Multis and Quattros, using the Virtual switch
-  - potential free relay(s) in our Inverters, Multis and Quattros, using the Generator start/stop Assistant. [[assistants:start]]
-  - (Expected in October 2015) [[ccgx:generator_start_stop|Automatic start stop from the Color Control GX]]
-It is also possible to combine those methods, by wiring the open contacts in parallel to each other.
-===== Starting a genset with three-wire interface =====
-To start such a genset, our two