Differences

This shows you the differences between two versions of the page.

--- assistants:start [2016-01-08 16:39] – ictbeheer
+++ assistants:start [2024-09-06 08:36] (current) – [What is next?] guy_stewart
@@ Line 1: / Line 1: @@
-====== Assistants introduction ======
+====== VEConfigure Assistants ======
 {{:assistants:e4a2932dc3973885bfc930b10a4c47a6.png}}
@@ Line 5: / Line 5: @@
 ==== What are Assistants? ====
-Think of Assistants as apps, as on a smart phone. Assistants are little applications that run inside a VE.Bus Multi, Inverter or Quattro. They reduce the overall cost of a system: in 99% of all installations it will not be necessary to add an additional PLC to get for example load shedding, optimizing use of solar energy or automatically starting and stopping a genset.
+Think of Assistants as apps, as on a smart phone. Assistants are little applications that run inside a VE.Bus Multi, Inverter or Quattro. They reduce the overall cost of a system: in 99% of all installations it will not be necessary to add an additional PLC (Programmable Logic Controller) to get for example load shedding, optimizing use of solar energy or automatically starting and stopping a genset.
-In advanced systems you can also combine multiple assistants, it can even be usefull to add an assistant multiple times. The Assistant logic is executed from top to bottom, which makes it possible to create complex logic.
+In advanced systems you can also combine multiple assistants, it can even be useful to add an assistant multiple times. The Assistant logic is executed from top to bottom, which makes it possible to create complex logic.
 To get a better understanding of the possibilities, read [[assistants:overview_of_available_assistants|the list of available assistants]].
@@ Line 32: / Line 32: @@
 ==== What is next? ====
-  * [[assistants:how_to_add_and_configure_an_assistant|How to add an Assistant from start to finish]]
-  * [[assistants:overview_of_available_assistants|Overview of available Assistants]]
-To keep posted on new Assistant developments, subscribe to our blog on https://www.victronenergy.com/blog/
+  * [[:assistants:how_to_add_and_configure_an_assistant|How to add and configure an Assistant]]
+  * [[:assistants:how_to_update_an_assistant|How to update an Assistant]]
+  * [[:assistants:overview_of_available_assistants|Overview of available Assistants]]
+  * [[:assistants:ignore_ac_input_using_the_generator_assistant|Ignore AC Input using the Generator start/stop Assistant]]
+  * [[dc_coupling:using_bmv_soc_in_a_vebus_assistant_setup]]
+  * {{ :assistants:3299-virtual-switch-ignore-ac-lesson.pdf |Virtual Switch Ignore AC input lesson}}
+==== Combining multiple Assistants ====
+Multiple Assistants can be used in one unit. For example the Programmable Relay is often used multiple times. When doing so; this is how they are evaluated:
+- an ON condition always has priority over an OFF condition
+- multi criteria in the ON ( or OFF ) list go by the OR principle
+===== DISQUS =====
 ~~DISQUS~~