Differences

This shows you the differences between two versions of the page.

--- ac_coupling:fronius [2021-03-20 03:23] – guystewart
+++ ac_coupling:fronius [2023-03-13 03:52] – [2.1 Requirements] guy_stewart
@@ Line 97: / Line 97: @@
 | Fronius IG Plus (*)   | Purchase and install the [[http://www.fronius.com/cps/rde/xchg/SID-FD8CF128-0D078554/fronius_international/hs.xsl/83_27954_ENG_HTML.htm#.VPhTUfnF_jU|datamanager 2.0]] |
 | Fronius Agilo      | Purchase and install the [[http://www.fronius.com/cps/rde/xchg/SID-FD8CF128-0D078554/fronius_international/hs.xsl/83_27954_ENG_HTML.htm#.VPhTUfnF_jU|datamanager box]] |
+| Fronius GEN24      | See here for [[https://www.victronenergy.com/live/ac_coupling:fronius#setup_local_area_network_lan_configuration|limitations and GEN24 special procedure]]  |
 (*) The Fronius Zero feed-in feature - which is part of an Energy Storage System [[ess:design-installation-manual|ESS]] - will work on all the above models except the //IG Plus//.
@@ Line 147: / Line 148: @@
 If you would like to connect the Fronius to be able to use the internet connection of your Local network, you have to set Gateway and DNS IP addresses on the Fronius as well. They should be exactly the same as in the Settings --> Ethernet of the GX Device.
+=== 2.2.1.4 special procedure for GEN24 model ===
+In Fronius GEN24 devices with software version 1.14 or higher, the Solar API interface is not activated by default and must be activated if required (e.g. integration of a GX device).
+The setting for this can be found on the user interface of the Fronius inverter under "Communication" - "Solar API".
+For GEN24, there is no physical toggle switch required (as there is with other models).
+Victron and Fronius have made no tests, nor make any claims about the performance of this integration.
+If light flickering issues occur, please contact your Fronius dealer.
 ==== 2.2.2 Adding Fronius to the GX Device ====