Differences

This shows you the differences between two versions of the page.

--- ac_coupling:fronius [2019-01-21 10:33] – [DISQUS] ictbeheer
+++ ac_coupling:fronius [2019-07-01 13:24] – [Zero Feed-in] mvader
@@ Line 77: / Line 77: @@
 ===== Zero Feed-in =====
-It is possible to make a Zero feed-in system with Victron & Fronius. The Venus device will the control the Fronius output power. See the [[ess:design-installation-manual|ESS manual]], chapter 2.1.3 Fronius Zero feed-in for details.
+It is possible to make a Zero feed-in system with Victron & Fronius. The Venus device will the control the Fronius output power. See the [[ess:design-installation-manual|ESS manual]], chapter 4.1.3 Fronius Zero feed-in for details.
 ===== Frequently Asked Questions =====
@@ Line 91: / Line 91: @@
 ==== Q4 Can I use the Fronius Smart Meter? ====
-No, when using a Fronius PV Inverter in a Victron system it is not possible to use the Fronius Smart Meter.
+That depends on the type of system and software configuration.
+A Fronius Smart Meter can be used in these two situations:
+  - when used only for reporting to Solarweb
+  - when used for limiting export, in a system where the Victron system is not configured as an ESS system.
+The Fronius Smart-Meter can not be used for the Fronius built-in export limiting feature when part of a Victron ESS system. Instead, use the Victron ESS Fronius Zero-feed in feature, see chapter 4.3.11, Fronius Zero Feed-in, in the [[ess:design-installation-manual|ESS manual]].
-Use any of the [[energy-meters:start|Victron supplied Energy Meters]] instead.
 ==== Q5 How can I get the Fronius firmware that improves flickering? ====
@@ Line 102: / Line 108: @@
 To update earlier and/or already installed PV Inverters, contact Fronius Tech Support for the file. The required file is fro29130.upd. Which works for all snap-inverter models (Primo, Symo and Eco). There is no, and will be no, fix available for Fronius Galvos.
+===== DISQUS =====
+~~DISQUS~~