====== ZYC SIMPO Pro ======

===== Manufacturer links =====

  * Product page: [[https://zyc-energy.com.au/products/info.html?id=82|ZYC SIMPO Pro (AU site, full spec tables)]]
  * Global site: [[https://zyc.energy/products/info.html?id=82|zyc.energy]] 
  * Datasheet PDF: not publicly linked; see [[https://zyc-energy.com.au/download|ZYC download page]]

===== Use with the HS19 (650 - 1000 V DC) =====

**SIMPO Pro E**
  * Modules per stack: **11 only** (the product allows 4 - 15; 10 or fewer sits below the HS19 range, 12 or more exceeds 1000 V at full charge)
  * Usable voltage range: **673 - 958 V**
  * Capacity: **127 kWh** per stack

**SIMPO Pro S**
  * Modules per stack: **16** (the product allows 10 - 16; 15 or fewer sits below the HS19 range)
  * Usable voltage range: **650 - 934 V** (battery floor is 640 V, so a sliver of capacity at the bottom is unusable; likely acceptable as the cutoff is rarely reached, confirm with ZYC)
  * Capacity: **82 kWh** per stack

FIXME derived from spec table per-module voltages, not yet verified

===== Full product specifications (unverified, from manufacturer spec table) =====

**SIMPO Pro E**
  * Module ~76.8 V / 11.52 kWh
  * Max constant current 150 A


**SIMPO Pro S**
  * Module ~51.2 V / 5.12 kWh
  * Max constant current 100 A

Both: 1 - 16 strings DC parallel; CAN / Modbus TCP / Modbus RTU; IP20/IP55.

===== Compatibility status =====

  * Test status: tested and running in field tests
  * FDCan support: yes

===== Setup guide =====

FIXME Setup instructions to be written.