====== Pylontech HV batteries ======

===== Force-H3 =====

==== Manufacturer links ====

  * Product page: [[https://en.pylontech.com.cn/products/forceh3|Pylontech Force-H3]]
  * Datasheet: [[https://pylonwebs3.s3.amazonaws.com/upload/2024/09/26/Force-H3_20240926105617A025.pdf|Force-H3 datasheet (Pylontech)]]
  * Operation manual: [[https://pimassetsprdst.blob.core.windows.net/assets/apc_Original/09/88/45470988.pdf|Force-H3 operation manual]]

==== Use with the HS19 (650 - 1000 V DC) ====

  * Modules per stack: **7 only** (the product allows 2 - 7; 6 or fewer sits below the HS19 range)
  * Usable voltage range: **650 - 818 V**. The battery's own discharge floor is approx. 605 V (estimated at 2.7 V/cell), below the HS19 minimum, so the bottom of the SOC range is unusable. 
  * Capacity: **36 kWh** per stack

==== Full product specifications (unverified, from manufacturer documents) ====

  * Module FH10050: 102.4 V nominal, 50 Ah / 5.12 kWh (32S LFP)
  * Up to 6 stacks in parallel

==== Compatibility status ====

  * Test status: will be tested soon
  * FDCan support: only up to 500 kbit/s (status 04-2024, update requested)

===== Powercube H2 (deprecated) =====

==== Not for use with the HS19 ====

Maximum stack voltage is 648 V at 12 modules, below the HS19 minimum of 650 V. No valid configuration exists. Not compatible with current HS19 hardware.