![\"\"](\"https:\/\/www.victronenergy.com\/blog\/wp-content\/uploads\/sites\/10\/2020\/08\/comp_140974920.jpg\")
<\/a>Their system has an energy meter which measures supplied to and taken from the grid and sends that information to the Color Control GX. The local grid electricity supplier offers a dual energy tariff – more expensive at peak times, cheaper at night. \u00a0This means that during periods of poor weather when the solar harvest is reduced, the system can be programmed to recharge the battery bank, when necessary, using grid energy during the cheaper overnight tariff.<\/p>\nThe private energy system is being installed by Callidus<\/a> who specialise in off-grid energy in remote locations. They were able to do a lot of pre-installation work at their own premises, in Devon. The system comprises of:<\/p>\n A legacy of research and development of Victron Energy components has resulted in extensive compatibility with important third party manufacturers allowing installers to customize their clients systems according to demand. The incorporation of Pylontech batteries into this Victron-controlled system is just one example of the seamless communication<\/a> made possible by that work.<\/p>\n Power is supplied to two separate consumer units, one of which is connected to critical loads such as lighting and refrigeration. In the event of a mains power outage these prioritised loads will continue to behave normally.<\/p>\n In the video Sue and Mark explain why they decided to install an independent energy system, and how it fits their lifestyle:<\/p>\n\n\n<\/a><\/p>\n\n
<\/a><\/li>\n<\/ul>\nPylontech batteries<\/h4>\n
Two AC domestic circuits<\/h4>\n