{"id":14602,"date":"2019-01-03T11:00:30","date_gmt":"2019-01-03T09:00:30","guid":{"rendered":"https:\/\/www.victronenergy.com\/blog\/?p=14602"},"modified":"2019-01-04T14:32:31","modified_gmt":"2019-01-04T12:32:31","slug":"diy-ingenuity-hydro-power-mkii-part-i","status":"publish","type":"post","link":"https:\/\/www.victronenergy.com\/blog\/2019\/01\/03\/diy-ingenuity-hydro-power-mkii-part-i\/","title":{"rendered":"DIY ingenuity: Hydro Power MkII – Part I"},"content":{"rendered":"

You may recall a year ago a blog about Hydro Power<\/a>, in which Markus Pauritsch used a MPPT<\/a> solar charge controller loaded and driven by a Pelton wheel<\/a> water turbine to charge his off-grid cabin battery system in the Austrian Alps.<\/p>\n

This year (the last day of 2018 as I write this) things have moved on from one man’s DIY system. The installation has now grown by necessity. Whilst the original install had worked well, that all came to a halt when a summer storm turned the hydro supply stream into a torrent.<\/p>\n

\"\"<\/a><\/p>\n

Some hundreds of tons of terrain slid down the hill, wiping out the Pelton wheel, the hydro feed barrel and most of the firehose feed. A further mudslide hit the wood shed, a tree fell a few metres from the cabin roof and Markus got a black eye!<\/p>\n

\"\"<\/a><\/p>\n

Time for a rethink.<\/p>\n

Project planning & build<\/h3>\n

Whilst pondering the rebuild, Markus talked it over with his friend Werner – who for some years had wanted to build an off-grid recreational home on the land he owns\u00a0adjacent to Markus, but lack of time on Werner’s part had prevented such a build. Pooling resources was the logical conclusion and a joint project was born.<\/p>\n

As before solar was to be part of the project for the cabin and Werner’s new off-grid static mobile home, yet the topography of the location warranted hydro power to provide the lion’s share of power.<\/p>\n

Topography<\/h5>\n

The distance between Markus and Werner’s location is 400m, with a height difference of plus 100m to Werner’s.<\/p>\n

\"\"<\/a><\/p>\n

Werner has a small fishpond to feed the pressure hose, which also acts perfectly as a surge tank. The actual measured head between the fishpond and proposed generator house is 90m. Water supply to the fishpond is constant at around 12 to 15 liters per second, depending on rainfall and season.<\/p>\n

\"\"<\/a><\/p>\n

This Google Maps 3D aerial view shows the proposed cable in red and hose in blue.<\/p>\n

\"\"<\/a><\/p>\n

Water turbine generator<\/h5>\n

As shown in the headline image of this blog 2 x Pelton Wheels were chosen for hydro generation, purchased from eBay.<\/p>\n

The datasheets below show Nozzle Diameter, Head, Water Flow, Open Circuit Voltage and Power. The smaller one has one nozzle, the larger one has two.<\/p>\n

\"\"<\/a><\/p>\n

Feed pipe<\/h5>\n

The feed pipe chosen was 90mm OD and 70mm ID, being vacuum stable and frost resistant. Around 500m of pipe was required. The weight of the drum exceeded 1.5 tons, so movement to location was difficult once off the transport delivery vehicle. Werner’s doggedness won the day.<\/p>\n

\"\"<\/a><\/p>\n

The pipe installation process was hard going and made worse by the storm damage, making the terrain particularly difficult under foot. A chainsaw winch was used to ease installation, winching from tree to tree down the hill.<\/p>\n

\"\"<\/a><\/p>\n

Cable<\/h5>\n

402m of 3 core 6mm2<\/sup><\/span> copper earth type cable was chosen, buried with the help of an excavator.<\/p>\n

\"\"<\/a><\/p>\n

Generator house<\/h5>\n

The woodshed became the generator house, being close to the stream and with an easily built outlet for the Pelton wheel water, but first the stored wood had to be moved before construction could begin.<\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Victron Components<\/h5>\n

Werner – 48V system:<\/p>\n