field test

PV Modules

A real world comparison between Mono, Poly, PERC and Dual PV Modules.

Realtime data
-- -- local time
Installation date: 09-03-2020
--
--
--
--
--
--
--
Irradiance
Romania
44°17'59.9"N
26°11'29.7"E

Mono

2500Wp --
Total solar yield: --

Split-cell

2500Wp --
Total solar yield: --

Poly

2500Wp --
Total solar yield: --

PERC

2500Wp --
Total solar yield: --

* This is a field test and the results are specific for this installation on this location, please research which is the best solution for your own situation as the results can be different based on environmental influences.

VE.Direct to VE.CAN interface

The VE.Direct to VE.CAN interface cable can be used to make BMV-700 information available on a VE.Can network. Where it can be read by a Color Control GX for example.

Limitations:
• The interface cable does not work with other VE.Direct products, such as Solar Chargers, Inverters and the BMV-712 Smart.
• When used in combination with a BMV-702 there is limited functionality with regards to the AUX function in the BMV: When used to measure starter battery voltage, that voltage will be transmitted to VE.Can. But when used to measure temperature and or mid-voltage, that data will not be transmitted on the VE.Can network. 

DEPRECATED: this interface cable is deprecated. Use a GX Device instead, it provides more and better functionality. More detailed information in this NMEA2000 chapter. And make sure to read our Marine MFD integration guide as well.

Downloads

Find a Victron Energy dealer near you.

Find a dealer