Field test: PV Modules

A real world comparison between Mono, Poly, PERC and Dual PV Modules.

Total solar yield: --
S
Total solar yield: --
S
Total solar yield: --
S
Total solar yield: --
S
Total solar yield: --
E
Total solar yield: --
W
Romania
--
--
Installation date: 09-03-2020
--
--
--
--
--
--
--
Irradiance

* This is a field test and the results are specific for this installation on this location please research which is the best solution for your own situation as the results can be different based on environmental influences.

Total solar yield as of 27/03/2023 when the results were reset:
Mono: 9158 kWh
Split-cell: 9511 kWh
Poly: 9113 kWh
Perc: 9471 kWh
Perc-east: 1970 kWh
Perc-west: 1730 kWh

Energy Meters are typically used in an Energy Storage Systemto measure the power and energy of the entire application at the distribution box and minimises energy import or export to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM Portal.

There are several models available from Victron:

  • Victron VM-3P75CT energy meter (Ethernet and VE.Can - for threephase, uses supplied CTs, max. 80A per phase)
  • ET112 (RS485 - for single-phase max. 100A)
  • ET340 (RS485 - for three-phase max. 65A)
  • EM24 Ethernet (Ethernet - for three-phase max. 65A)
  • EM540 (RS485 - for three-phase max. 65A)

For more information, please see the Selection Guide - Energy Meters PDF below.

Downloads & Support

Find a Victron Energy dealer near you.

Find a dealer