Feb 11th - Feb 13th
http://www.belgianboatshow.be/
Flanders expo, Gent, Belgium
2011 Dec 27th
Capi2 Nederland BV has entered into partnership with Victron Energy BV as part of the integration of Victron products into its Capi2 power distribution system. Read full article
![]() ![]() |
BlueSolar Charge ControllersBlueSolar 12/24-PWM Three models: 5A, 10A or 20A at 12V or 24V * - Low cost PWM controller - Internal temperature sensor - Three stage battery charging (bulk, absorption, float) - Protected against over current - Protected against short circuit - Protected against reverse polarity connection of the solar panels and/or battery - With low voltage load disconnect output - Optional remote display (20A model only) BlueSolar DUO 12/24-20 20A at 12V or 24V * - PWM controller - Charges two separate batteries. E.g. the starter battery and the service battery of a boat or mobile home - Programmable charge current ratio (standard setting: equal current to both batteries) - Charge voltage settings for three battery types (Gel, AGM and Flooded) - Internal temperature sensor and optional remote temperature sensor - Protected against over current - Protected against short circuit - Protected against reverse polarity connection of the solar panels and/or battery. |
Two AC inputs with integrated transfer switch. The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.
All Quattro- and several Multi inverter/chargers now have two AC outputs. In addition to the standard no-break output, an auxiliary output is available which disconnects the connected load during battery operation. It is, for example, the perfect solution for preventing an electric water heater from discharging your battery.
