May 14th - May 17th
Messe Galerie Fulda, Fulda (Hessen), Germany
2008 May 7th
The China International Boat Show represents the entire manufacturing chain of the industry, from basic materials to ready-to-sail luxury boats. Victron Energy products were displayed by China distributor Shenzhen Royal Technology Co. Ltd. Read full article
![]() |
Phoenix Inverter 12 / 24 / 48 Volt
Phoenix Inverter Compact 12 / 24 Volt Pure sinewave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. Models range from 150VA to 3000VA per module. Scalable: up to six Phoenix Inverters 3000 can be paralleled in single phase, split phase and three phase configuration.
Documents
|
|
Related products |
|
|
Phoenix Inverter Control
This panel is intended for Phoenix inverters equipped with a UTP remote monitoring and control socket. It can also be used on a Phoenix Multi when an automatic transfer switch but no charger function is desired. The brightness of the LED’s is automatically reduced during night time.Only for models: 12/1200, 12/1600, 12/2500, 24/1200, 24/1600, 24/3000 UTP patch lead required. |
|
Battery Alarm
An excessively high or low battery voltage is indicated by an audible and visual alarm, and a relay for remote signalling. |
|
UTP patch lead
Allows to connect Phoenix Inverter Control or VE Interface MK.1.5M ASS030065000 10M ASS030065010 15M ASS030065020 |
|
Cable for Parallel connect
The Phoenix Multi Plus can be used in a parallel mode to do this a data cable is needed to synchronize the system. Only for models: 12/1600 12/2500 24/1600 24/3000 |
|
Connection bag 3-phase operation
Required for three-phase operation.Only for models: 12/2000 12/2500 24/2000 24/3000 |
|
|
VE Interface MK.2B
Every Phoenix Multi/MultiPlus is ready to communicate with a computer through its RS-485 data port. All you need to link to your PC and be able to set and read out all parameters is the data link as shown. Moreover, all Victron Energy products equipped with an RS-485 data port can easily be integrated in a computerised monitoring and control system, such as VE.Net from Victron Energy.Only for models: 12/800, 12/1200, 12/1600, 12/2500, 24/800, 24/1200, 24/1600, 24/3000 VE-Configure software and a UTP patch lead required. |
|
Plug Adapter IEC320(male)/European Schuko(female)
Only for models:12-180 12-220 12-350 12-600 24-180 24-220 24-350 24-800 |
Two AC inputs with integrated transfer switch. The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.
